Low

EPCOS  B57891M0103K000  Thermistor, NTC, 10 kohm, B57891M Series, 3950 K, Through Hole, Radial Leaded

EPCOS B57891M0103K000
Technical Data Sheet (569.30KB) EN Ver todos os documentos técnicos

A imagem é meramente ilustrativa. Consulte a descrição do produto.

Descrição geral do produto

The B57891M0103K000 is a 2-pin NTC Thermistor with copper-clad Fe wire, tinned leads and lacquer-coated thermistor disk. This B57891M series through hole mounting thermistor is marked with resistance and tolerance. A lead (wire) may be bent at a minimum distance of twice the wire's diameter plus 4mm from the component head or housing. When bending ensure the wire is mechanically relieved at the component head or housing. Twisting (torsion) by 180° of a lead bent by 90° is permissible at 6mm from the bottom of the thermistor body. Soldering can use resin-type flux or non-activated flux. The soldering due to insufficient preheating may cause ceramic cracks. Suitable for temperature measurement and compensation.
  • 2.5mm Lead spacing
  • Bending radius should be at least 0.75mm
  • 200mW Maximum power
Do not store thermistors where they are exposed to heat or direct sunlight. Avoid contamination of thermistor surface during storage, handling and processing. Do not touch components with bare hands.
Contact of NTC thermistors with any liquids and solvents shall be prevented. It must be ensured that no water enters the NTC thermistors (e.g. through plug terminals). Gloves are recommended.

Informação do produto

Zero Power Resistance at 25°C:
10kohm
Product Range:
B57891M Series
Beta Value (K):
3950K
Thermistor Mounting:
Through Hole
Thermistor Case Style:
-
Thermistor Terminals:
Radial Leaded
Operating Temperature Min:
-40°C
Operating Temperature Max:
125°C
Automotive Qualification Standard:
-
Operating Temperature Range:
-40°C to +125°C
No. of Pins:
2
Thermistor Type:
NTC
Resistance:
10 kohm
Thermistor Tolerance:
-10% to +10%
SVHC:
No SVHC (15-Jun-2015)

Procurar produtos semelhantes  agrupados por atributo comum

Aplicações

  • Test & Measurement

Notas

Contact of NTC thermistors with any liquids and solvents shall be prevented. It must be ensured that no water enters the NTC thermistors (e.g. through plug terminals). Gloves are recommended.

Legislação e Ambiente

País de origem:
Austria

País onde se realizou a maior parte do processo de produção

Conformidade RoHS:
Sim
Tarifa N.º:
85334010
Peso (kg):
.000381

Produtos semelhantes

Procure produtos que tenham funcionalidade semelhante à deste. Seleccione uma das seguintes ligações para aceder a uma página de grupo de produtos que apresenta todos os produtos desta categoria e que partilham o mesmo atributo indicado.