Low

MICROCHIP  PIC16F886-I/SP  8 Bit Microcontroller, Flash, PIC16F, 20 MHz, 14 KB, 368 Byte, SPDIP-28

MICROCHIP PIC16F886-I/SP
Technical Data Sheet (6.27MB) EN Ver todos os documentos técnicos

A imagem é meramente ilustrativa. Consulte a descrição do produto.

Descrição geral do produto

The PIC16F886-I/SP is a 8-bit flash-based CMOS Microcontroller. It features 256bytes of EEPROM data memory, self programming, an ICD, 2 comparators, 11 channels of 10-bit Analogue-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire serial peripheral interface (SPI™) or the 2-wire inter-integrated circuit (I²C™) bus and an enhanced universal asynchronous receiver transmitter (EUSART). The Analogue-to-Digital converter (ADC) allows conversion of an analogue input signal to a 10-bit binary representation of that signal. This device uses analogue inputs, which are multiplexed into a single sample and hold circuit. The output of the sample and hold is connected to the input of the converter. The converter generates a 10-bit binary result via successive approximation and stores the conversion result into the ADC result registers (ADRESL and ADRESH).
  • Software selectable frequency range of 8MHz to 32kHz
  • Fail-safe clock monitoring for critical applications
  • Clock mode switching during operation for low-power operation
  • Power-saving sleep mode
  • Power-on reset (POR)
  • Selectable brown-out reset (BOR) voltage
  • Extended watchdog timer (WDT) with its own on-chip RC oscillator for reliable operation
  • In-circuit serial Programming™ (ICSP™) via two pins
  • In-circuit debug (ICD) via two pins
  • High-endurance flash/EEPROM cell
  • Self-reprogrammable under software control
  • Programmable code protection
  • Capture/compare/PWM (CCP) module
  • Enhanced capture/compare/PWM (ECCP) module with auto-shutdown and PWM steering
  • Master synchronous serial port (MSSP) module SPI™ mode, I²C™ mode with address mask capability
ESD sensitive device, take proper precaution while handling the device.

Informação do produto

Controller Family/Series:
PIC16F
CPU Speed:
20MHz
Program Memory Size:
14KB
RAM Memory Size:
368Byte
No. of Pins:
28Pins
MCU Case Style:
SPDIP
No. of I/O's:
24I/O's
Embedded Interface Type:
EUSART
Supply Voltage Min:
2V
Supply Voltage Max:
5.5V
Packaging:
Each
Product Range:
-
Automotive Qualification Standard:
AEC-Q100
MSL:
-
SVHC:
No SVHC (17-Dec-2015)

Procurar produtos semelhantes  agrupados por atributo comum

Aplicações

  • Automotive;
  • Industrial;
  • Consumer Electronics

Legislação e Ambiente

Nível de sensibilidade à umidade:
-
País de origem:
United States

País onde se realizou a maior parte do processo de produção

Conformidade RoHS:
Sim
Tarifa N.º:
85423190
Peso (kg):
.003598

Alternativas

Produtos semelhantes

Procure produtos que tenham funcionalidade semelhante à deste. Seleccione uma das seguintes ligações para aceder a uma página de grupo de produtos que apresenta todos os produtos desta categoria e que partilham o mesmo atributo indicado.