MAX20446CEVKIT#

MAX20446C evaluation kit (EV kit) demonstrates the MAX20446C, an integrated 6-channel high-brightness LED driver with boost controller for automotive displays. The EV kit operates from a DC supply voltage between 4.5V and 36V, and the switching frequency can be either set at 2.2MHz or at 400kHz. The EV kit operates in stand-alone mode. Spread-spectrum mode is enabled by default for EMI improvement. The EV kit demonstrates phase-shifted pulse-width modulation (PWM) dimming. Dimming can be performed externally using a PWM signal applied to the DIM PCB pad. The hybrid dimming feature can also be enabled through a resistor connected between the SET pin and GND to reduce EMI. The EV kit also demonstrates short-LED, open-LED, boost output undervoltage and overvoltage, and overtemperature-fault protection.

• Powers HB LEDs for medium-to large-sized LCD displays in automotive & display backlight applications
• 400kHz to 2.2MHz resistor-programmable switching frequency with Spread-Spectrum Option
• Phase-shift dimming
• Demonstrates cycle-by-cycle current limit and thermal-shutdown features
• Demonstrates wide dimming ratio
• Proven PCB and thermal design
• Fully assembled and tested

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party