ACPL-C797T-000E

The ACPL-C797T-000E is a 1-channel 8-pin surface-mount Sigma-Delta Modulator for general-purpose current and voltage sensing. The 1-bit second-order sigma-delta (Σ-∆) modulator that converts an analogue input signal into a high-speed data stream with galvanic isolation based on optical coupling technology. It operates from a 5V power supply with dynamic range of 79dB with an appropriate digital filter. The differential inputs of ±200mV (full scale ±320mV) are ideal for direct connection to shunt resistors or other low-level signal sources in applications such as motor phase current measurement. It converts a low bandwidth analogue input into a high-speed one-bit data stream by means of a sigma-delta (Σ-∆) over-sampling modulator. The modulator data and on-chip sampling clock are encoded and transmitted across the isolation boundary where they are recovered and decoded into separate high-speed clock and data channels.

• Superior optical isolation and insulation
• 10MHz Internal clock
• 16-bit Resolution no missing codes (12-bit ENOB)
• 79dB Typical signal-to-noise ratio
• ±1% Gain error
• ±200mV Linear range with single 5V supply (±320mV full scale)
• 3 to 5.5V Wide supply range for digital interface
• 25kV/µs Common-mode transient immunity

Aplicações

Automotive, Sensing & Instrumentation

Avisos

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.